VESPA LX 50 Spécifications télécharger pdf (Page 39)

Spark plug

Disconnect and remove the spark plug tube.

- Examine it carefully and replace it if the insulator

is chipped or cracked.

- Measure electrode gap with a thickness gauge

and, if necessary, adjust the gap by carefully bend-

ing the outer electrode forward or away.

- Make sure the sealing washer is in good condi-

tions.

- Fit the spark plug, screw it manually and lock it

to the prescribed torque with a spark plug spanner.

Characteristic

Electrode gap

0.5 ÷ 0.6 mm

Electric characteristic

Spark plug

NGK ER9EH-6N

Locking torques (N*m)

Spark plug 8 ÷ 10

Hub oil

Check

Rest the vehicle on its centre stand on an even

surface.

- Unscrew the oil dipstick "A", dry it with a clean

cloth and reinsert it, screwing it in thoroughly.

- Pull out the dipstick and check that the oil level is

above the "middle" notch (dipstick with 3 notches).

For dipsticks with 2 notches, the oil level must re-

main in the lower half of the dipstick.

-Screw up the oil dipstick again and make sure it

is locked properly into place.

Pas de commentaire

VESPA LX 50 Spécifications Page 39