VESPA LX 50 Manuel de service télécharger pdf (Page 46)

3. Drain up all the vehicle fuel; spread antirust grease on the uncoated metal parts;

keep the wheels off the ground, by resting the chassis on two wooden wedges.

4. For the battery, follow the procedures described in the «Battery» section.

5. Drain the petrol from the carburettor float chamber through the bleed cap.

Recommended products

AGIP CITY HI TEC 4T

Oil to lubricate flexible transmissions (brake, throttle control and mixer, odometer)

Oil for 2-stroke engines: SAE 5W-40, API SL, ACEA A3, JASO MA

Cleaning the vehicle

Use a low pressure jet of water to soften the caked dirt and mud deposited on the

painted surfaces. Once softened, sponge off mud and dirt using a car body sponge

soaked in a car body shampoo and water solution (2-4% of car shampoo in water).

Then rinse with abundant water, and dry with a shammy cloth. For the engine exterior,

use petrol, a brush and clean cloths. Petrol can damage paintwork. Remember that

any polishing with silicone wax must always be preceded by washing.

WARNING

To avoid the appearance of oxidations, wash the vehicle every time it is used in

certain areas or in special conditions of:

· Environmental / seasonal conditions: use of salt, de-icer chemical products on

the road in winter.

· Air pollution: city and/or industrial areas.

· Salinity and humidity of the atmosphere: marine areas, hot and wet weather.

3 Maintenance

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Pas de commentaire

VESPA LX 50 Manuel de service Page 46