VESPA LX 50 Spécifications télécharger pdf (Page 101)

- Before refitting the bracket in the wheel axle,

place the O-ring as shown in the photograph so

that it is correctly placed after fitting the bracket.

- Refit the washer and the Seeger ring.

- Refit the lower screws fixing the shock absorber

to the bracket and tighten at the prescribed torque

Locking torques (N*m)

Lower shock absorber clamp 20 ÷ 27

Overhaul

- The bracket for the shock absorber -calliper at-

tachment has two roller bearings separated one

from the other as shown in the photograph

- Remove the two roller bearings from the bracket

with the specific tool operating on the shock ab-

sorber attachment side as shown in the photo-

graph

Specific tooling

020376Y Adaptor handle

020441Y 26 x 28 mm adaptor

020365Y 22 mm guide

- Remove the oil seal on the wheel hub side with

the screwdriver as shown in the photograph

Vespa LX 50 Suspensions

SUSP - 101

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 159 160

Pas de commentaire

VESPA LX 50 Spécifications Page 101